перед началом замены колеса надо по

перед началом замены колеса надо подложить что-нибудь спереди и сзади колес, для того чтобы а/м был неподвижен. После этого достаем запасное колесо, проверяем его. Потом начинаем ослаблять гайки на колесе и поднимаем автомобиль с помощью домкрата. Потом откручиваем гайки на колесе и снимаем колесо. Ставим запасное колесо вместо старого и закручиваем гайки. Опускаем автомобиль и затягиваем гайки. Потом убираем колесо в машину и упоры из под колес

Результаты (английский) 1:

before replacing the rims it is necessary to enclose something in front of and behind the wheel, to a/m was motionless. Then we obtain a spare wheel, check it out. Then begin to loosen the nuts on the wheel and raise the vehicle using a Jack. Then unscrew the nut on the wheel and remove the wheel. Put the spare wheel instead of the old and spin a nut. Drop the car and delay a nut. Then remove the wheel in the machine and stops under the wheels

Результаты (английский) 2:

before it is necessary to replace the wheels enclose anything front and rear wheels to a / m was stationary. After that, the spare wheel, check it. Then we begin to loosen the nuts on the wheel and raise the vehicle with the jack. Then unscrew the nut on the wheel and remove the wheel. We put the spare tire in place of the old, and tighten the screws. We lower the car and tighten the nuts. Then remove the wheel from the car and stops the wheels

Результаты (английский) 3:

Before you start changing the wheel must be send to back something at front and rear wheels, to a/m was stationary. After that our skin was black like an emergency spare wheel, check it.Then begin to loosen the nuts on the wheel and raise the vehicle using a floor jack. Then откручиваем nuts on the wheel and discontinuing any wheel. Put the spare wheel instead of the old one and закручиваем nuts.Inconsistency the vehicle and lagging behind the nut. Then saturates the wheel in the machine and the stops from under the wheels