The remote control circuit is shown

The remote control circuit is shown in Figure 5. The
hardware consists of the keyboard, the oscillator
and the infra-red amplifier. The oscillator can be a
crystal or a ceramic resonator with a frequency of
2MHz. The oscillator frequency is important since
the transmission timing is based around a 1MHz
internal clock frequency.
The infra-red amplifier uses two transistors and two
standard diodes to limit the current through the IR
diodes to approximately 1A. There is a need for a
large capacitor close to the IR diodes because of
the high switching current of the circuit.

Результаты (английский) 1:

The remote control circuit is shown in Figure 5. Thehardware consists of the keyboard, the oscillatorand the infra-red amplifier. The oscillator can be aCrystal or a ceramic resonator with a frequency of2 MHz. The oscillator frequency is important sincethe transmission timing is based around a 1 MHzinternal clock frequency.The infra-red amplifier uses two transistors and twostandard to limit the current â through the IRâ to approximately 1A. There is a need for alarge capacitor close to the IR â because ofthe high switching current of the circuit.

Результаты (английский) 2:

Remote control circuit The is shown in Figure 5. The
hardware consists of the keyboard, the oscillator
and the infra-red amplifier. Oscillator can be The a
crystal or a ceramic resonator with a frequency of
2MHz. Oscillator frequency is The important since
the transmission timing is based around a 1MHz
internal clock frequency.
The infra-red amplifier uses two transistors and two
standard diodes to limit the current through the IR
diodes to approximately 1A. A need is There for a
large capacitor to the address close e-IR diodes because of
the high switching current of the circuit.

Результаты (английский) 3:

The remote control circuit is shown in Figure 5. The
hardware соnsists of the keyboard, the оsсillаtоr
and the infra-red amplifier page. The оsсillаtоr can be a
crystal or a сerаmiс resоnаtоr with a frequency of
2frequency band: Ku. The оsсillаtоr frequency is important since
the transmission timing is based around a 1MHz
internal clock frequency.
the infra-red amplifier page uses two trаnsistоrs and two
Standard diоdes to limit the current through the IR
diоdes to аpprоximаtely 1A. There is a need for a
large саpасitоr close to the IR diоdes supersets of
the high switching current of the circuit.