Для определения возможности примене

Для определения возможности применения данного метода в производстве было определено поле рассеивания получаемого диаметра отверстия для сравнения с допуском по ГОСТ 16093–2004 [7]. На заготовке толщиной 2 мм были образованы 10 отверстий и измерены внутренние диаметры верхних и нижних отбортовок по двум взаимно перпендикулярным осям. Для определения поля рассеивания получаемого диаметра рассчитывалось среднее значение показателя выборочной совокупности диаметров отверстий [9] по формуле

Результаты (английский) 1:

To determine the feasibility of the application of this method in production was defined field dispersion resulting hole diameter for comparison with tolerance according to GOST 16093-2004 [7]. The workpiece thickness 2 mm 10 holes were formed and measured internal diameter of upper and lower otbortovok along two perpendicular axes. To determine the fields of dispersion obtained average value calculated diameter indicator sampling hole diameters [9] by the formula

Результаты (английский) 2:

To determine the possibility of using this method in the production has been defined field dissipation resulting hole diameter compared with a tolerance according to GOST 16093-2004 [7]. A workpiece 2mm holes 10 were formed were measured and inner diameters of the upper and lower otbortovok along two mutually perpendicular axes. To determine the diameter of the stray fields resulting calculated average value of the total sample diameter hole [9] according to the formula

Результаты (английский) 3:

to determine the feasibility of the method in the production of the dispersion was determined by comparison with the diameter of holes for admission of gost 16093–2004 [7]. to extract 2 mm thick were formed 10 holes and measured the internal diameter of upper and lower отбортовок along two mutually perpendicular axes. to determine the dispersion of the diameter was calculated the average of the sample population diameter holes (9) by the formula