Fuses Fuses are widely used nowaday

Fuses
Fuses are widely used nowadays as protection devices. Тhey are
utilized in various circuits, electrical equipment and installations. .Fuses
serve to protect them against оvеrcuпeпts and short-circuits.

There are different types of fuses in use nowadays. Of them, quartz
sand fuses serve for voltages ир to 500 volts; fuses of this kind are pro
duced with сuпепt ratings of 15 to 60 атр and of 100 to 350 атр.
Fuses are commonly used in lowvoltage industrial installations
rated ир to 1,000 У.
Fuse protection is based оп а very simple principle: in case of а
shortcircuit or оvеrсuпепt, when the maximum value of сuпепt has
been exceeded, the fusible link of а fuse is heated to its melting point.
This opens the circuit and disconnects the circuit from the power
source. In case of а fault, one should replace the faulty fusible element
Ьу а new one.
Fuses are used both in direct сuпепt (d.c.) and altemating силепt
(а.с.) circuits.

Результаты (английский) 1:

Предохранитель Предохранители широко используются в настоящее время в качестве устройств защиты. Они используются для построения различных цепей, электрооборудования и установок. . Предохранитель служат для защиты их от overcupepts и коротких замыканий. Существуют разные типы взрывателей и по сей день. Из них, кварц песок дует, служить, за исключением Ил до 500 вольт; предохранитель такого рода про подготовленное с supept рейтинги 15 до 60 ATR и от 100 до 350 АТР. Предохранители широко используются в низковольтных промышленных установок Номинальная Ил до 1.000 у. Предохранитель защиты основан ОП и очень простой принцип: в случае short circuit or oversupept, when the maximum value of supept has been exceeded, the fusible link of a fuse is heated to its melting point. This opens the circuit and disconnects the circuit from the power source. In case of a fault, one should replace the faulty fusible element ′U and the new one. Fuses are used both in direct supept (d.c.) and altemating silept (a.s.) circuits.

Результаты (английский) 2:

Fuses
Fuses are widely used nowadays as protection devices. They are
utilized in various circuits, electrical equipment and installations. .Fuses
Serve them to protect against short-overcupepts circuits and. There are different types of fuses in use nowadays. Them Of, quartz? Sand fuses serve for Il voltages to 500 volts; this kind of fuses are pro? duced supept with ratings of 15 to 60 ATP and of 100 to 350 ATP. Fuses are commonly used in low? voltage industrial installations rated Il to 1,000 W. Fuse protection is based op a very simple principle: in case of a short? circuit or oversupept, when the maximum value of supept has been exceeded, the fusible link of and is heated to fuse its melting point. This opens the circuit and disconnects the circuit from the power source. In case of a fault, one should replace the faulty fusible element Ly and one new. Fuses are used both in direct supept (dc) and altemating silept (AS) circuits.

Результаты (английский) 3:

Предохранители
Предохранители широко используются в настоящее время в качестве устройств защиты. тhey описаны в (
), электрическое оборудование и сооружения. . Предохранители
служат для защиты их от overcunents и короткий - (.

существуют разные типы взрывателей и по сей день. из них,
кварцевый песок предохранители служат для напряжений ил до 500 вольт; предохранители такого рода про