Я получил запрос из тракторного зав

Я получил запрос из тракторного завода. Заводу требуется система очистки масла в узле трансмиссии трактора. Система должна обеспечить очистку узла трансмиссии от механических загрязнений и воды во время тестирования перед установкой на трактор. Объем моторного масла 10W-40 в трансмиссии - 150 л. Требуется забрать масло из узла, очистить от воды и примесей с тонкостью 10 мкм и вернуть масло в узел. При этом необходимо обеспечить давление 50 бар и поток 70 л/ч в возвратной магистрали. Возможно ли создать систему обеспечивающую такие характеристики? В прикреплении существующая на заводе система очистки. Она не обеспечивает очистку от воды и ее хотят заменить.

Результаты (английский) 1:

I got a request from a tractor factory. Plant oil purification system is required in the transmission of the tractor. The system must provide a clear transmission site from mechanical impurities and water during the test before installing on a tractor. The amount of engine oil 10W-40 in transmission-150 l To pick up oil from the site clean of water and impurities 10 µm with subtlety and return the oil to the site. Thus it is necessary to ensure pressure 50 bar and 70 l/h flow return line. Is it possible to create a system which provides such features? In attaching the cleaning system. It does not clean up the water and want to replace it.

Результаты (английский) 2:

I got a call from a tractor factory. The plant requires cleaning oil in the transmission of a tractor unit. The system must provide clean the transmission unit from mechanical impurities and water during testing prior to installation on the tractor. Displacement Engine Oil 10W-40 transmission - 150 l. Required to pick up oil from the site, remove water and impurities with the subtlety of 10 microns and return the oil to the node. It is necessary to provide pressure of 50 bar and flow 70 l / h in the return pipe. Is it possible to create a system of providing such characteristics? In the attachment of the existing factory cleaning system. It does not provide clean water and wants to replace it.

Результаты (английский) 3:

I have received a request from the tractor factory. Factory needs the system oil clean-up in the node transmission of the tractor.The system should be able to clean the transmission assembly of mechanical impurities and water during the test before installing on the tractor. Amount of engine oil 10W-40 in the transmission 150 l. You want pick up oil from the assembly,Clean water and impurities with nuance 10 micron and return the oil to the Assembly. It would be important to ensure that pressure 50 bar and flow 70 l/h) in the return line.Whether it is possible to create a system that provides such characteristics? In attaching the existing factory installed system cleaning. It does not provide clean water and its wish to replace.