По проведенным исследованиям были з

По проведенным исследованиям были заключены основные выводы:
1) Выявлены 5 стадий процесса термического сверления.
2) Выявлена зависимость геометрии отбортовок от подачи и толщины заготовки.
3) Выявлена зависимость прочности резьбового соединения на срез от подачи.
4) Доказано упрочнение материала в зоне образования отверстия.
5) Получаемое отверстие соответствует допуску внутреннего диаметра 7 степени точности.

Результаты (английский) 1:

Studies on main findings were concluded:1) Identified 5 stages of thermal drilling.2) the dependence of geometry from the otbortovok and the thickness of the workpiece.3) the dependence of the strength of the screw connection on the slice from the filing.4) proven hardening material in the area of education openings.5) Produced the hole corresponds to tolerance of inside diameter 7 accuracy.

Результаты (английский) 2:

According to the research it was concluded the main conclusions :
1) identified five stages of thermal drilling process .
2) The dependence of the geometry otbortovok feed and thickness of the workpiece .
3) The dependence of the strength of the threaded connection on the section of the feed .
4) proved hardening of the material in the hole formation zone .
5) The resulting hole corresponds to the admission of the inner diameter of 7 degree of accuracy .

Результаты (английский) 3:

studies have been the main conclusions:1) identified five stages of thermal drilling process.2) a dependence of the geometry отбортовок and the thickness of the material.3) a dependence of the strength of connections on a result from the application.(4) strengthening the education material is wound.(5) provided with the tolerance of hole inner diameter 7 accuracy.