Постоянные проблемы DT91 :- Во врем

Постоянные проблемы DT91 :

- Во время печати контроллер «зависает», печать прекращается, иногда с обильным проливом чернил.
Ошибка «Internal error Common Response Time Out». Помогает перегрузка контроллера.

- Частые ошибки «Connection (Data Station) has been lost», «Connection (Cue Output) has been lost» и «Fiber disconnect»
Также сопровождаются прекращением печати.

- Малая наработка печатных голов (150 – 200 часов). Обычно по ошибке «Charge Shot», реже по ошибке Segment Over Current».
Автоматическая очистка печатных голов недостаточно эффективна.

- Постоянная ошибка «PIC air pressure» как по каналу «A» так и по «B». Фильтры меняли, вентиляторы исправные.
Работе не мешает, но возможно является причиной других сбоев или ошибок.

Результаты (английский) 1:

Constant problems: DT91-During printing controller hangs, printing stops, sometimes with abundant Strait ink. The error "Internal error Common Response Time Out. Helps the controller overload.-Frequent errors "Connection (Data Station) has been lost", "Connection (Cue Output) has been lost" and "Fiber disconnect"Also accompanied by cessation of print.-Low hours of use print heads (150-200 hours). Usually by mistake "Charge Shot", less the Segment in error Over Current ".Automatic cleaning print heads is not effective.-Permanent error "PIC air pressure" as on the channel "A" and "B". Changed filters, fans are working correctly. The work does not interfere, but perhaps is the reason other failures or errors.

Результаты (английский) 3:

the problem DT91:

- during the зависает» printing controller, printing is terminated, sometimes with plentiful in ink. "the mistake" internal error common response time out. helps the overload controller.

- frequent mistakes "connection (data station) has been lost»" connection (Cue output) has been lost» and fiber disconnect»
also accompanied by cessation of the press.

- a small accumulation of the print head (150 to 200 hours). usually a "charge Shot», less mistake with over Current».
automatic cleaning of the print heads are not satisfactory.

- a mistake "pic. pressure» as channel" a "and" b ". filters changed every fans.
the prevents,but maybe cause other faults or errors.