Установлено, что применение нанопор

Установлено, что применение нанопорошков оксидов Al2O3 и TiО2 эффективен для управления структурой и механическими свойствами как сварных швов, так и напыленных покрытий.
Повышение механических свойств присуще всем исследовательским образцам, при этом наиболее существенное влияние оказывает нанооксид алюминия в количестве 0,5об.%, увеличивая предел текучести сварного шва на 49% и предел прочности на 23%. Увеличению ударной вязкости сварных швов, примерно в 2 раза, наиболее способствует оксид титана в количестве 1об.%.
Введении нанопорошка оксида алюминия в количестве 1,5об.%. в плазменные покрытия позволило уменьшить коэффициент трения и увеличить износостойкость покрытий в 2-3 раза.

Результаты (английский) 1:

It is established that the application of Al2O3 and TiO2 Nanopowders of oxides is effective to control the structure and mechanical properties of welded joints of sprayed coatings, as well.Improvement of mechanical properties inherent in all research designs, with the most significant impact of aluminum nanooksid, 5ob. 0%, increasing the yield strength of the weld on the 49% and tensile strength at 23%. Increase the toughness of welded seams, about 2 times, most contributes to the titanium oxide of 1ob.%.The introduction of aluminium oxide nanopowder of 1, 5ob.%. the plasma coating to reduce friction and increase wear resistance coatings in 2-3 times.

Результаты (английский) 2:

It is found that the use of nano oxides Al2O3 and TiO2 is effective to control the structure and mechanical properties as welds and sprayed coatings.
Improving the mechanical properties inherent in all research samples, with the most significant influence in the amount of nano alumina 0,5ob.%, increasing the yield strength of the weld of 49% and a tensile strength of 23%. Increasing toughness of welds is about 2 times more contributes titania in an amount 1ob.%.
Introduction alumina nanopowder in quantity 1,5ob.%. in plasma coatings allowed to reduce friction and increase wear resistance of coatings 2-3.

Результаты (английский) 3:

It is established that the application tuition fee oxides Al2O3 and TiО2 is effective for the management structure and mechanical properties as welded seams, and coated blades coatings.
Improved mechanical properties are common to all research designs, with the most significant impact is нанооксид aluminum in the number of 0.5 on the. %,Increasing tensile strength of the weld at the 49% limit and strength to 23 %. An increase in shock viscosity of the welds, approximately 2 times, the most contributes to the number of titanium oxide 1on. % .
Introduction нанопорошка aluminum oxide in the amount of 1.5. %. In plasma coverage has helped to reduce the coefficient of friction and increase durability coatings in 2-3 times.