Буровая установка обычно имеет высо

Буровая установка обычно имеет высоту от 50 до 60 метров и чаще всего устанавливается на полозья. При переезде для бурения следующей скважины ее передвигают чаще в зимнее время, по твердому грунту, при помощи 20-25 тракторов. Как правило, на месторождении находится много буровых установок для того, чтобы можно было проводить одновременное бурение нескольких скважин, а кроме того, чтобы не перетаскивать буровую на большие расстояния. Обычно с одного места или куста забуривают несколько скважин, которые имеют разные направления. Тем самым буровую приходится перетаскивать всего лишь на несколько метров для бурения новой скважины.Основные части буровой установки, это ее основание, где располагается лебедка, рабочая площадка с роторным столом, при помощи которого осуществляется бурение, мачта, на которой имеется одна или две площадки для работы верхового, корона, где находится крон-блок, талевый блок с элеватором для поднятия труб из скважины.

Результаты (английский) 1:

The drilling rig is usually 50 to 60 meters high and is most often mounted on skids. When moving to drill the next well, it is moved more often in winter, on hard ground, using 20-25 tractors. As a rule, there are many drilling rigs at the field so that several wells can be drilled simultaneously, and also to avoid dragging the drilling rig over long distances. Usually, several wells are drilled from one place or cluster, which have different directions. Thus, the drilling rig has to be dragged only a few meters to drill a new well. The main parts of the drilling rig are its base, where the winch is located, a working platform with a rotary table, with which drilling is carried out, a mast, on which there are one or two platforms for the horseman to work, a crown, where the crown block is located, a traveling block with an elevator for lifting pipes from the well.

Результаты (английский) 2:

The drilling rig is usually between 50 and 60 meters high and is usually installed on a slide. When moving to the next well for drilling, it usually uses 20-25 tractors to move on hard soil in winter. Usually, the oil field has many drilling rigs in order to drill multiple oil wells simultaneously and avoid long-distance drag drilling. Usually, drill several wells in different directions from a place or shrub. Therefore, drilling can only be done by dragging a few meters.
The main component of a drilling rig is its base, on which the winch is located. A workbench with a rotating table is used for drilling, and there are one or two top level workbenches on the mast. The Krone block is located in Corona, and a pulley block with an elevator is used to lift pipelines from the oil well.

Результаты (английский) 3:

Rigs are usually 50 to 60 meters high and are most often installed on belts. When moving the next well, move more frequently with the help of 20-25 tractors on solid soil in winter. Usually, there are many drilling rigs in the oil field, so that multiple wells can be drilled at the same time, and there is no need to drag drilling for a long distance. Usually, several wells with different directions are forgotten from a place or shrub. Therefore, the drilling rig can drill a new well only by dragging a few meters.
The main part of the drilling rig is its foundation, where a winch, a working platform with a rotary table, a platform for drilling, a platform with one or two platforms, a crown, and a crane with a spreader are placed to lift the pipeline from the well.