технические работы12-1 Connection m

технические работы12-1 Connection method
This network is configured of one host computer (master) and 1 to 32 VT240S units (slaves).
CN2 (connector type: modular) on the basic section or TB3 is used for the connection.
Refer to section 2-4. Precautions for wiring the control signal for details on CN2 and TB3, and for the
wiring methods.
The total length of the connected cable must be within 150 meters.
By using a commercially-available RS485-RS232C converter or USB converter unit as a relay, the
inverter can be connected to a host computer equipped with a serial port or USB, such as a
commercially-available personal computer.
• Connecting the host computer and VT240S (1-on-1)
Host computer
RS232C
RS485
VT240S unit
CN2
or
TB3
Host computer
USB
RS485
VT240S unit
CN2
or
TB3
DS1-1
Host computer
RS232C
RS485
VT240S unit
CN2
or
TB3
DS1-1
RS485
USB/RS485
converter
DS1-1
RS232C/RS

Результаты (английский) 1:

technical raboty12-1 Connection methodThis network is configured of one host computer (master) and 1 to 32 VT240S units (slaves).Cn2 (connector type: modular) on the basic section or TB3 is used for the connection.Refer to section 2-4. Precautions for wiring the control signal for details on CN2 and Mtv, and for thewiring methods.The total length of the cable must be connected within 150 meters.By using a commercially-available RS485-RS232C converter or USB converter unit as a relay, thethe inverter can be connected to a host computer, equipped with a serial port or USB, such as (a)commercially-available personal computer.• Connecting the host computer and VT240S (1-on-1) Host computerRS232CRS485VT240S unitCn2orTB3Host computerUSBRS485VT240S unitCn2orTB3DS1-1Host computerRS232CRS485VT240S unitCn2orTB3DS1-1RS485Usb/RS485converterDS1-1Rs232c/RS

Результаты (английский) 2:

Technical raboty12-1 method Connection
This network is configured of one host computer (master) and of 1 to 32 units VT240S (slaves).
CN2 (connector type: modular) on the basic section or TB3 is used for the connection.
Refer to section 2 -4. Precautions for wiring the control signal for details on CN2 and TB3, and for the
wiring methods.
The total length of the connected cable must be within 150 meters.
By using a commercially-available RS485-RS232C converter or USB converter unit as a relay, the
inverter can be connected to a host computer equipped with a serial port or USB, such as a
commercially-available personal computer.
• Connecting the host computer and VT240S (1-on-1)
Host computer
RS232C
RS485
VT240S unit
CN2
or
TB3
Host computer
USB
RS485
VT240S unit
CN2
or
TB3
DS1-1
Host computer
RS232C
RS485
VT240S unit
CN2
or
TB3
DS1-1
RS485
USB / RS485
converter
DS1-1
RS232C / RS

Результаты (английский) 3:

technical работы12 - 1 connection method. this network is configured of a host computer (master) and 1 to 32 VT240S units (slaves).
CN2 (connector type: modular) on the basic section or TB3 is used for the connection. Refer to section 2 - 4. Precautions for wiring the control signal for details on CN2 and TB3, and for the

wiring methods.the total length of the connected cable must be within 150 meters.
by using a commercially available rs485 or rs232c converter usb converter unit, and a relay, the
inverter can be connected to a host computer equipped with a serial port or usb, such as a commercially available personal computer
.
- connecting the the host computer and VT240S (1, - 1)
host computer



VT240S rs232c rs485 unit CN2

and
TB3