Функция трансформатора – повышать н

Функция трансформатора – повышать напряжение на электростанции и понижать у потребителя для безопасного использования. Трансформатор работает 24 часа в сутки, семь дней в неделю и на протяжении этого времени происходят постоянные потери электроэнергии, проходящей через него, которые составляют от 2-х до 4-х процентов. Такие потери делятся на две различные категории: нагрузочные потери, вызванные нагрузками на трансформатор, во время конвертации электричества и потери холостого хода (ток холостого хода), вызванные присутствием незначительных нагрузок. Трансформаторы с аморфными магнитопроводами снижают потери холостого хода, благодаря использованию аморфных сплавов ** в сердечнике.

Результаты (английский) 1:

Transformer function is to increase the voltage at power plants and lowering consumer for safe use. Transformer works 12:00 am a day, seven days a week and during this time the constant loss of electricity passing through it, which range from 2 to 4 percent. Such losses are divided into two different categories: load losses due to loads on the transformer, while converting the electricity and no-load losses (no-load supply current), caused by the presence of insignificant loads. Transformers with amorphous magnetic circuits reduce the no-load losses, thanks to the use of amorphous alloys * in the core.

Результаты (английский) 2:

The function of the transformer - to raise the voltage at the power plant and lower the consumer for safe use. The transformer is available 24 hours a day, seven days a week, and during this time there are constant losses of electricity passing through it, which ranges from 2 to 4 percent. Such losses are divided into two different categories: load losses caused by the load on the transformer during the conversion loss of electricity and idling (no-load current) caused by the presence of the minor loads. Transformers with amorphous magnetic cores reduce load losses due to the use of amorphous alloys ** core.

Результаты (английский) 3:

the function of the transformer is to raise the voltage at the power plant and lower the consumer for safe use. the transformer operates 24 hours a day.seven days a week, and during this time is the permanent loss of electricity passing through it which are from 2 to 4 per cent. such losses are divided into two different categories:load loss caused by loads on the transformer during the conversion and loss of electricity (current idling idling), caused by the presence of small loads.transformers with аморфными магнитопроводами reduced idling losses, through the use of a well alloy * * сердечнике.