Я сделал кэширование нодов на ветке

Я сделал кэширование нодов на ветке inav_9034, ревизия 7d5bc1bc7613, но этого оказалось не достаточно. Стало быстрее где-то в 3 раза, но все-равно занимает порядка 6 минут на моей машине. Проблема в библиотечной функции SelectSingleNode(). Есть другие аналогичные методы того же класса, которыми я пробовал заменить SelectSingleNode(), но результат тот же. Проблема проявляется только в дебаг-моде.

Результаты (английский) 1:

I did caching nodes on a branch inav_9034, audit 7d5bc1bc7613, but it was not enough. It became quickly somewhere in 3 times, but it's still takes about 6 minutes on my machine. The problem of the library function selectsinglenode ().There are other similar methods in the same class, which I have tried to replace selectsinglenode (), but the result is the same. The problem occurs only in debug-mode.

Результаты (английский) 2:

I made the caching nodes on a branch inav_9034, revision 7d5bc1bc7613, but this was not enough. Is faster in 3 times but still takes about 6 minutes on my machine. The problem is library function SelectSingleNode (). There are other similar methods of the same class, which I have tried to replace the SelectSingleNode (), but the result is the same. The problem manifests itself only in debug-mode.

Результаты (английский) 3:

I made a caching нодов the Besed inаv_9034, audit 7d5BC1bс7613, but this has proved to be not enough. It was faster than the 3 times, but all the same as it takes about 6 minutes on my machine. The problem in library functions SeleсtSingleNоde( ).There are other similar methods in the same class, which I've done replace SeleсtSingleNоde( ), but the result is the same. The problem occurs only in дебаг-fashion.