Особенно на удорожание остекленных

Особенно на удорожание остекленных фасадов, по словам экспертов, влияют отклонения от требований строительных норм при разработке и реализации проекта часто фасадные конструкции спроектированы на уровне рисунка, не учитывают конструктивные и эксплуатационные особенности применяемых материалов. Ведет к удорожанию и неудачная (с точки зрения оптимизации отходов стекла и алюминия) разработка конфигурации фасада. А также внесение существенных изменений в проектную документацию на любой стадии работ и наличие значительных отклонений фактических размеров проемов и несущих перекрытий от проектных (от допустимых плюс/минус 20 мм). Поэтому, каждый объект требует тщательного полного обмера, так как каждый фасад индивидуален и обычно неповторим дважды.

Результаты (английский) 1:

Especially on the rise of the glazed facades, according to experts, is affected by deviations from the requirements of building codes in the design and implementation of a project often façade constructions designed to level a picture, do not take into account the constructive and operational features of the materials used. Increases the cost and unsuccessful (in terms of optimization of waste glass and aluminium) configuration of the façade. As well as making significant changes in the project documentation at any stage of the works and the existence of significant deviations of actual size of openings and structural floors from project (acceptable plus/minus 20 mm). Therefore, each object requires careful full measurement, since each façade is unique and inimitable usually twice.

Результаты (английский) 2:

Especially on the rise in the glazed facades, according to experts, affected by deviation from the requirements of building norms in the drafting and implementation of the project is often designed on the facade design pattern level, do not account for structural and operational features of the materials used. It leads to higher prices and bad (in terms of optimization of waste glass and aluminum) development facade configurations. As well as significant changes to the project documentation at any stage of work and there are significant deviations of actual sizes of the openings and bearing floors of the project (from the permissible plus / minus 20 mm). Therefore, each object requires careful measurement complete, as each facade is different and unique is usually twice.

Результаты (английский) 3:

especially in the appreciation of остекленных facades, experts say, are deviations from the requirements of building standards in the formulation and implementation of the project often facade design designed at the level of the painting, do not take into account structural and operational characteristics of materials used. lead to increase the cost and bad (from the point of view of the optimization of waste glass and aluminium), the configuration of the facade. and also a significant change in the project documents at any stage work and significant variances actual size openings and closings of the project (from which the allowable plus / minus 20 mm). however, each object requires a full обмера, as each facade is individual and unique, usually twice.