Независимо от конструкции электроли

Независимо от конструкции электролизеров и их мощности, процесс на них одинаков и идет непрерывно при температуре около 960 °С [6]. Электролизный цех насыщен разнообразным технологическим, транспортным, вентиляционным и газосборным оборудованием, специализированными машинами по обслуживанию электролизеров и пр., что создает потенциальную опасность для персонала особенно от поражения электрическим током. Как показано в разделе 3.4 , на производство 1 т электролитического алюминия расходуется более 2,5 т разнообразного сырья, токсикологическая характеристика которого представлена в разд. 7. Следовательно, при производстве 1 т алюминия образуется около 1,5 т отходов, которые в газообразном и твердом виде выбрасываются в окружающую среду. Кроме того, отходы образуются при проведении ремонтов и эксплуатации металлургических агрегатов; они вывозятся в отвал.

Результаты (английский) 1:

Regardless of the design of electrolytic cells and their capacity to process them the same and runs continuously at temperatures of around 960° c [6]. Electrolysis shop filled with a variety of technological, transport, ventilation and gazosbornym equipment, specialized machines for servicing the electrolysers, etc., that creates a potential hazard for the personnel especially from electrical shock. As shown in section 2.1, for production of 1 ton of electrolytic aluminium spent more than 2.5 tons of various raw materials, toxicological characterization of which is presented in the section. 7. Consequently, in the production of 1 t of aluminium is formed about 1.5 tonnes of waste, which are gaseous and solid form released into the environment Wednesday. In addition, waste formed when carrying out repairs and maintenance of metallurgical units; they are taken to the dump.

Результаты (английский) 2:

Regardless of cell designs and the power to them, and the same process is continuously at a temperature of about 960 ° C [6]. Electrolysis shop filled with a variety of technological, transport, ventilation and gas gathering equipment, specialized machines for servicing the electrolysers, etc.., That creates a potential hazard to personnel especially from electric shock. As shown in Section 3.4, to produce 1 ton of electrolytic aluminum is consumed more than 2.5 tons of various raw materials, toxicological characteristic of which is shown in section. 7. Therefore, in the production of 1 ton of aluminum produced 1.5 tons of waste, which in gaseous and solid form released into the environment. In addition, waste is generated during the repair and maintenance of metallurgical equipment; they are taken to the dump.