Монтаж оборудования в зоне свободно

Монтаж оборудования в зоне свободного доступа осуществляется с улицы электрической талью с автотранспорта на наружную металлическую площадку на отметке +26,700 в осях «1-2»; «E» и через люки в перекрытиях на отметке +26,700; +23,100; +19,500 внутри здания, а также электрической талью с автотранспорта на наружную площадку на отметке +15,900 в осях «3-4», «E».

Результаты (английский) 1:

Installation of equipment in the zone of free access is done with electric hoist Street with vehicles to the outer metal pad at elevation + 26.700 axes "1-2"; "E" and through the hatchways in the ceilings at elevation + 26.700; + 23.100; + 19.500 inside the building, as well as an electric hoist with vehicles to the outer pad at elevation + 15.900 axes "3-4", "E".

Результаты (английский) 2:

Installation of equipment in the area of ​​free access is carried out in the street with electric hoist motor to the outer metal pad at around 26.700 in the "1-2" axes; «E» and through hatches in the ceiling at the level of 26.700; 23.100; 19.500 inside the building, as well as the electric hoist to transport to the outer area at around 15.900 in the "3-4" axes, «E».

Результаты (английский) 3:

installation of equipment in the zone of access is from the electric motor to the outer metal with talia set at + + 26700 in s "1"; "e and through hatches in the перекрытиях point + 26700; + 23100; + 19500 inside the building, as well as an electric motor to the outer pad with talia at + + 15900 in axes" 3 - 4, e.